Abib, Luciana (Marine Production Systems do Brasil) |
Dielectric system for submarine electro hydraulic umbilical up to 35 kV - C.5.1.10 |
Electrical and thermal design of umbilical cable - A.9.2 |
Acedo, Miguel (Universidad de Sevilla, Spain) |
Annealing effect on the conductivity of XLPE insulation in power cable - C.7.1.4 |
Adachi, Kazuhisa (SWCC SHOWA Cable System, Japan) |
Development of outdoor-sealing-end of prefabricated-composite-insulator for 66/77 kV XLPE cable - C.5.1.16 |
Agnel, Serge (LEM, Univ. de Montpellier, France) |
Evolution of space charge and internal electric field distributions in HVDC cable under long term testing - A.7.6 |
Study of thermally and water tree aged polyethylene by infrared spectroscopy, absorption currents and space charge measurements - C.7.1.12 |
Electrical and physico-chemical analysis of Belgium medium voltage cables data bank - C.7.1.19 |
Agoris, Pantelis D. (Delft University of Technology, Netherlands) |
On-site VHF partial discharge detection on power cable accessories - A.4.2 |
Sensitivity verification procedure of VHF PD detection systems - C.7.2.6 |
Alexander, Graeme (Olex Australia, Australia) |
Development of ceramifying insulation materials for cables in fire situations - B.3.4 |
Alshibani, Salem M. (Ministry of Energy, Yarmouk, Kuwait) |
Outsourcing preventive maintenance on underground power transmission cables - A.6.2 |
Alter, Joachim (SIEMENS, Germany) |
Gas insulated transmission lines - Under-ground bulk power transmission achieving a maximum of operational safety and reliability - A.3.6 |
Amano, Kazuo (FUJIKURA Ltd,, Japan) |
Application of optical fiber current sensors to underground cables - A.5.5 |
Anders, George J. (Kinectrics Inc., Toronto) |
Barrier optimization algorithm applied to calculation of optimal loading of dissimilar cables in one trench - B.10.6 |
Argaut, Pierre (SILEC CABLE, France) |
French experience in aluminium laminated screens - A.1.4 |
Large projects of EHV underground cable systems - A.2.1 |
New 345 kV underground extruded cable system project in Connecticut - A.2.3 |
Choices of flame retardant materials for cables with improved fire behaviour - B.3.5 |
Use of ecoconception software to design a HV cable connection - A.8.5 |
Ashizawa, Y. (Chubu Electric Power Co, Japan) |
Development on the mortar material for cable systems in a directional drilling - C.5.2.5 |
Audouin, Ludmila (ENSAM, Paris, France) |
Kinetic modelling of phenol stabiliser efficiency in polyethylene submited to nuclear environments - C.7.1.16 |
Aue, Volker (NEXANS, Germany) |
Modern cable systems in steel pipes - new designed XLPE-insulated cables substituting paper-insulated pipe-type cables - B.4.6 |
Awad, Ray (Hydro-Québec, Canada) |
Evaluation of the condition and the performance of underground high voltage fluid filled links at Hydro-Québec - B.4.2 |
Azpiazu, Luciano (Iberdrola, Spain) |
New high performance, environmentally friendly MV power cable insulations - B.2.1 |
New concept in cables and accessories for low voltage underground distribution in spain - B.2.2 |
Barbeau, Sophie (NEXANS, France) |
Ecoconception, recycling and life cycle analysis in cable industry - A.8.6 |
Barber, Ken (Olex Australia, Australia) |
Development of ceramifying insulation materials for cables in fire situations - B.3.4 |
Challenges & opportunities of installing HV cable in Australia & Sri Lanka - B.10.1 |
Barbeta, Javier (General Cable, Spain) |
Choices of flame retardant materials for cables with improved fire behaviour - B.3.5 |
Barendregt, Peter (NKT Cables, Germany) |
Installing a long-distance HTS cable - A.3.3 |
Baudoin, Fulbert (Université Paul Sabatier, Toulouse, France) |
A user-friendly tool for simulating the time-dependent field distribution in PE insulation on the basis of a physical approach - C.7.1.1 |
Tools for understanding the thermo-electrical behaviour of XLPE insulation in power cables and accessories - B.9.2 |
Bausiere, Robert (Université de Lille, France) |
Power cable modeling under power electronic converter constraints - B.9.4 |
Beauguitte, Dimitri (LABORELEC, Belgium) |
Electrical and physico-chemical analysis of Belgium medium voltage cables data bank - C.7.1.19 |
Begovic, Miroslav (Georgia Inst., ECE-NEETRAC, GA,USA) |
Validating “diagnostic tests” for cables in service - B.6.6 |
Beigert, Michael (SebaKMT, Germany) |
Experiences with PD offline diagnosis on MV cables - Knowledge rules for asset decisions - C.7.2.5 |
Belana, Juan (Universidad de Catalunya, Spain) |
Annealing effect on the conductivity of XLPE insulation in power cable - C.7.1.4 |
Belmans, Ronnie (K.U.Leuven, Belgium) |
Thermal transient analysis of underground cables - A.5.6 |
Benard, Laurent (PRYSMIAN, France) |
French experience in aluminium laminated screens - A.1.4 |
Use of ecoconception software to design a HV cable connection - A.8.5 |
Benato, Roberto (University of Padova, Italy) |
Multiconductor cell analysis of power cable steady state - C.5.2.9 |
Benjaminsen, Jan Tore (SINTEF Energy Research, Norway) |
Water treeing at high hydrostatic pressure and temperatures - C.7.1.13 |
Bergeron, François (IREQ, Canada) |
A new customized pulling-cable software - B.2.4 |
Bergkvist, Mikael (ABB Power Systems, Sweden) |
Increased voltage for the HVDC light product range – a complete solution - B.4.7 |
Development of extruded single core cables for deep waters - B.7.1 |
Bergmann, Volker (Technische Universitaet Berlin, Germany) |
New approach for high voltage cable on-site testing - A.4.6 |
Bernier, Simon (IREQ, Canada) |
Time Domain Spectroscopy (TDS) as a diagnostic tool for MV XLPE underground lines - B.6.3 |
Diagnostic testing of MV accessories by Time Domain Spectroscopy (TDS) - C.7.2.17 |
Bernstein, Bruce (Bruce S. Bernstein Consulting, USA) |
Condition assessment of power cable systems in the energized state - C.7.2.16 |
Bertini, Glen J. (Novinium Inc., WA, USA) |
Advances in chemical rejuvenation: extending MV cable life 40 years - C.5.1.9 |
Advances in chemical rejuvenation of submarine cables - A.9.4 |
Bessede, Jean-Luc (AREVA T&D, France) |
Potential of multilayer coating for improvement of the dielectric withstand in gas insulated cable - A.3.5 |
Beucher, Eric (CRITT Haute Normandie, France) |
Corrosion kinetics of LV cable galvanised steel screen - B.2.3 |
Bratt, Shawn (AIR LIQUIDE DTA, France) |
Development and demonstration of a long length transmission voltage cold dielectric superconducting cable to operate in the Long Island Power Authority grid - A.3.4 |
Brument, Yves (EDF R&D, France) |
New specification to check cable sheath resistance to termites - B.1.5 |
Corrosion kinetics of LV cable galvanised steel screen - B.2.3 |
Harmonising MV cables - B.2.6 |
Cabero Alonso, Roberto (Iberdrola Ingeniería y Construcción, Spain) |
Undergrounding and reorganization of the electrical system of the city of Madrid - A.2.5 |
Calveras, Daniel (General Cable, Spain) |
Use of nanofillers in high performance of MV cables under fire conditions. - B.3.6 |
Campus, Alfred (BOREALIS AB, Sweden) |
Effect of semicon-insulation interface on space charge formation in HVDC polymeric cables - B.7.4 |
The use of model cables for evaluation of DC electrical properties of polymeric cable materials - B.7.6 |
Crosslinking and water treeing in polyethylene insulation - C.7.1.8 |
Canerot, Isabelle (SILEC CABLE, France) |
Use of nanofillers in high performance of MV cables under fire conditions. - B.3.6 |
High Performance MV Cable Semi Conducting Shields - C.5.1.1 |
Cantin, Bruno (IREQ, Canada) |
On-line location of partial discharges in an electrical accessory of an underground power distribution network - A.7.2 |
Castellon, Jérôme (LEM, Univ. de Montpellier, France) |
Evolution of space charge and internal electric field distributions in HVDC cable under long term testing - A.7.6 |
Study of thermally and water tree aged polyethylene by infrared spectroscopy, absorption currents and space charge measurements - C.7.1.12 |
Electrical and physico-chemical analysis of Belgium medium voltage cables data bank - C.7.1.19 |
Cavallini, Andrea (University of Bologna, Italy) |
Partial discharge detection in power cables: practical limits as a function of cable length - A.4.4 |
Chandrasekar, S. (Sona College of Technology, Tamilnadu, India) |
Partial discharge detection in power cables: practical limits as a function of cable length - A.4.4 |
Chatterton, Wayne (UtilX Corporation, WA, USA) |
Cable rejuvenation technology; past, present and future - C.7.2.14 |
Chen, Xiaolin (Xi'an Jiaotong University, China) |
Sheath circulating current calculations and measurements of underground power cables - B.9.7 |
Cheng, Yonghong (Xi'an Jiaotong University, China) |
Sheath circulating current calculations and measurements of underground power cables - B.9.7 |
Chevalier, Peggy (RTE, National Centre for Grid Expertise, France) |
Environmental impacts in rural area of a HV underground link - A.8.3 |
Cho, Sang-Moon (NeoTelecom, Seoul, South Korea) |
Wavelet analysis based scheme for fault detection and classification in underground power cable systems - C.7.2.2 |
Choi, Ho-Woong (Hyundai Heavy Industries, South Korea) |
Wavelet analysis based scheme for fault detection and classification in underground power cable systems - C.7.2.2 |
Feasibility study on application of WiMAX technology to underground cables data acquisition - C.7.2.3 |
Monitoring based maintenance for underground cables utilizing sensor networks - C.7.2.15 |
Cichecki, Piotr (Delft University of Technology, Netherlands) |
Insulation diagnosis of high voltage power cables - C.7.2.1 |
Novel method for on-site testing and diagnosis of transmission cables up to 250 kV - C.7.2.10 |
Ciuprina, Florin (Politehnica University of Bucharest, Romania) |
Crosslinking and water treeing in polyethylene insulation - C.7.1.8 |
Cloet, Eric (ELIA, Brussel,) |
Thermal transient analysis of underground cables - A.5.6 |
Coates, Mark (ERA Technology, UK) |
Design of a 45 circuit duct bank - B.10.3 |
Colin, Xavier (ENSAM, Paris, France) |
Kinetic modelling of phenol stabiliser efficiency in polyethylene submited to nuclear environments - C.7.1.16 |
Comellini, Roberto (PRYSMIAN, Italy) |
Challenges of the second submarine interconnection between Spain and Morocco - A.9.1 |
Coors, Peter (TU Dresden, Germany) |
HV AC testing of super-long cables and gas-insulated lines in factory and on-site - A.10.5 |
Côté, Jacques (Réseau de Distribution, Hydro-Québec, Canada) |
Emergency conditions applied to triplex medium-voltage XLPE cables having flat strap neutrals - B.1.4 |
Courset, Ludovic (RTE CNER,, France) |
Transition joints - C.5.1.13 |
Current rating of cables installed in plastic ducts - B.8.4 |
Crine, Jean-Pierre (Technology Consultant, St Bruno, Canada) |
A molecular approach to the electrical aging of polymeric cables - C.7.1.15 |
A molecular approach to the electrical aging of polymeric cables - C.7.1.15 |
Czaszejko, Tadeusz (Monash University, Australia) |
Sensitivity of PD inception to change of electrical design in polymeric insulated cable systems - B.9.1 |
Czupryna, Stephen (Geca Tapes b.v., France) |
Improvements in superabsorbent water blocking materials for new power cable applications - B.9.3 |
Dallaire, Julien (Réseau de Distribution, Hydro-Québec, Canada) |
Emergency conditions applied to triplex medium-voltage XLPE cables having flat strap neutrals - B.1.4 |
Dardel, Boris (NEXANS, Switzerland) |
Oil replacement by water in unused oil-filled power cables - A.8.2 |
de Angelis, Angelo (ComEd Chicago, Il, USA) |
Measurements of thrust load in cable systems rigidly installed in duct / manhole structures - B.8.6 |
de Paula, João Alves (NEXANS, Brasil) |
Aluminium conductors in anti-robbery cables - B.10.2 |
De Rai, Luca (PRYSMIAN, Italy) |
Polymeric armor design of an improved protection to mechanical stresses and fluids for Oil Gas and Petrochem (OGP) applications". - B.3.7 |
de Vries, Frank (Nuon Tecno, Netherlands) |
Insulation diagnosis of high voltage power cables - C.7.2.1 |
Advanced solution for on-site diagnosis of distribution power cables - C.7.2.4 |
Novel method for on-site testing and diagnosis of transmission cables up to 250 kV - C.7.2.10 |
de Wild, Frank H. (KEMA, Netherlands) |
HV power cables installed in multi-purpose tunnels, a challengeable option! - A.2.6 |
HV cables operating in a dynamic rating regime, a beneficial option! - C.5.2.4 |
A dynamic rating system for a hybrid 150 kV transmission system - A.6.5 |
Delattre, Michel (PGI Nordlys, France) |
Improvements in superabsorbent water blocking materials for new power cable applications - B.9.3 |
Denche, Gregorio (Red Electrica de España, Spain) |
Challenges of the second submarine interconnection between Spain and Morocco - A.9.1 |
Denissov, Denis (University of Stuttgart, Germany) |
Partial discharge diagnostic for cable terminations - C.7.2.8 |
Dercle, Dominique (EDF ERD, France) |
Effect of ageing on MV underground asset reliability - B.6.1 |
Desmet, Jan (Hogeschool West-Vlaanderen, Belgium) |
Thermal transient analysis of underground cables - A.5.6 |
Diego, José Antonio (Universidad de Catalunya, Spain) |
Annealing effect on the conductivity of XLPE insulation in power cable - C.7.1.4 |
Space charge measurements in XLPE insulated mid-voltage cable: correlation with cable performance. - C.7.1.6 |
Dissado, L.A. (University of Leicester, UK) |
Effect of semicon-insulation interface on space charge formation in HVDC polymeric cables - B.7.4 |
Tools for understanding the thermo-electrical behaviour of XLPE insulation in power cables and accessories - B.9.2 |
Dorison, Eric (EDF R&D, France) |
Health index, a tool for asset management - B.4.1 |
Drapeau, Jean-François (IREQ, Canada) |
Time Domain Spectroscopy (TDS) as a diagnostic tool for MV XLPE underground lines - B.6.3 |
Diagnostic testing of MV accessories by Time Domain Spectroscopy (TDS) - C.7.2.17 |
Dubois, D. (NEXANS, France) |
400 kV 2500mm² XLPE cable system prequalification and type test for Middle East environment - A.1.6 |
The use of insulated wires Milliken conductors in high power transmission underground AC lines - B.8.1 |
Duphil, Dominique (SILEC CABLE, France) |
Choices of flame retardant materials for cables with improved fire behaviour - B.3.5 |
Dupont, I. (RIPS, France) |
Ecoconception, recycling and life cycle analysis in cable industry - A.8.6 |
Duvivier, M. (NEXANS, France) |
400 kV 2500mm² XLPE cable system prequalification and type test for Middle East environment - A.1.6 |
Easter, Mark (General Cable, IN, USA) |
New high performance, environmentally friendly MV power cable insulations - B.2.1 |
High Performance MV Cable Semi Conducting Shields - C.5.1.1 |
Elze, H. (LEMKE DIAGNOSTICS, Germany) |
PD-monitoring and on-site-commissioning-test of 400 kV XLPE-insulated cable circuits at Jebel Ali / Dubai - A.7.3 |
Espilit, Thierry (EDF R&D, France) |
Diagnostic for paper cable condition assesment - A.5.4 |
Evenset, Gunnar (NEXANS, Norway) |
Qualification, supply and installation of the world's first 420 kV XLPE submarine cable system in Norway - A.9.3 |
Everaere, Jacques (Geca Tapes b.v., France) |
Improvements in superabsorbent water blocking materials for new power cable applications - B.9.3 |
Fabiani, Davide (University of Bologna, Italy) |
Effect of semicon-insulation interface on space charge formation in HVDC polymeric cables - B.7.4 |
Fagouri, Chris (CIBA Specialty Chemicals, USA) |
Stabilizer concepts for Silane crosslinked polyethylene cable applications - C.5.1.3 |
Fara, Antonio (ENEL, Italy) |
Development of the high voltage extruded cables: Italian experience - A.1.5 |
Faremo, Hallvard (SINTEF Energy Research, Norway) |
Initiation site analysis of vented water trees growing from the conductor screen of service and laboratory aged XLPE cable insulation - C.7.1.9 |
Water treeing at high hydrostatic pressure and temperatures - C.7.1.13 |
Faugstad, Kirsten (Statnett, Norway) |
Qualification, supply and installation of the world's first 420 kV XLPE submarine cable system in Norway - A.9.3 |
Fenger, Mark (Kinectrics Inc., Canada) |
Sensitivity assessment for partial discharge measurements on solid dielectric transmission cables - A.7.1 |
Fickert, Lothar (Technical University of Graz, Austria) |
K-factor measurement of cables for optimum reliability of distance protection and fault locators - B.9.6 |
Filippini, Jean César (LEMD - CNRS / UJF, France) |
Crosslinking and water treeing in polyethylene insulation - C.7.1.8 |
Foottit, Frith (Queensland University, Australia) |
Computer simulation of measurements on XLPE cables - C.7.1.2 |
Fournier, Daniel (Hydro-Québec, Canada) |
On-line location of partial discharges in an electrical accessory of an underground power distribution network - A.7.2 |
Fournier, Jérôme (NEXANS, France) |
Understanding and optimization of long term ageing in cable industry - C.7.1.18 |
Franchaud, Jean-Jacques (Université de Lille, France) |
Power cable modeling under power electronic converter constraints - B.9.4 |
