Maguire, James (American Superconductor, MA, USA) |
Development and demonstration of a long length transmission voltage cold dielectric superconducting cable to operate in the Long Island Power Authority grid - A.3.4 |
Maioli, Paolo (PRYSMIAN, Italy) |
Passive loops technique for electromagnetic fields mitigation: applications and theoretical considerations. - A.8.4 |
Maiz, Gonzalo (Iberdrola, Spain) |
New high performance, environmentally friendly MV power cable insulations - B.2.1 |
New concept in cables and accessories for low voltage underground distribution in spain - B.2.2 |
Mansouri, Fatima (Office National de L'Electricité, Morocco) |
Challenges of the second submarine interconnection between Spain and Morocco - A.9.1 |
Markalous, S. (LEMKE DIAGNOSTICS, Germany) |
PD-monitoring and on-site-commissioning-test of 400 kV XLPE-insulated cable circuits at Jebel Ali / Dubai - A.7.3 |
Martinez, Juan (General Cable, Spain) |
Choices of flame retardant materials for cables with improved fire behaviour - B.3.5 |
Masarella, Elisenda (General Cable, Spain) |
New high performance, environmentally friendly MV power cable insulations - B.2.1 |
Matallana, J. (NEXANS, France) |
400 kV 2500mm² XLPE cable system prequalification and type test for Middle East environment - A.1.6 |
Evolution of space charge and internal electric field distributions in HVDC cable under long term testing - A.7.6 |
Matey, Gabriel (Products and Marketing Ltd, Switzerland) |
Exploring the water treeing inhibition effect of antioxidants for XLPE insulation - C.7.1.10 |
Matsumura, Masao (Power System Engineering, Japan) |
Renewal works of underground transmission system in KEPCO - B.4.4 |
Mattmann, John-Peter (NEXANS, Switzerland) |
Oil replacement by water in unused oil-filled power cables - A.8.2 |
Meijer, Sander (Delft University of Technology, Netherlands) |
On-site VHF partial discharge detection on power cable accessories - A.4.2 |
Sensitivity verification procedure of VHF PD detection systems - C.7.2.6 |
Meurice, Dominique (EDF R&D, France) |
Health index, a tool for asset management - B.4.1 |
Leak location in oil paper cables - C.7.2.12 |
Mikes, Endre (AREVA T&D, Switzerland) |
Potential of multilayer coating for improvement of the dielectric withstand in gas insulated cable - A.3.5 |
Min, Byoung-Woon (Hyundai Heavy Industries, South Korea) |
Wavelet analysis based scheme for fault detection and classification in underground power cable systems - C.7.2.2 |
Feasibility study on application of WiMAX technology to underground cables data acquisition - C.7.2.3 |
Monitoring based maintenance for underground cables utilizing sensor networks - C.7.2.15 |
Mirebeau, Pierre (NEXANS, France) |
French experience in aluminium laminated screens - A.1.4 |
400 kV 2500mm² XLPE cable system prequalification and type test for Middle East environment - A.1.6 |
Superconducting cables - status and applications - A.3.1 |
Evolution of space charge and internal electric field distributions in HVDC cable under long term testing - A.7.6 |
Use of ecoconception software to design a HV cable connection - A.8.5 |
The use of insulated wires Milliken conductors in high power transmission underground AC lines - B.8.1 |
Mizuno, Takehiko (VISCAS Corporation, Japan) |
Development of DC +/- 250 kV coaxially-integrated return conductor extruded cable - B.7.3 |
Mohaupt, Peter (BAUR Pruef- und Messtechnik, Austria) |
New approach for high voltage cable on-site testing - A.4.6 |
Monchy-Leroy, Carole (EDF R&D, France) |
Nuclear cables : lifetime simulation - B.6.2 |
Kinetic modelling of phenol stabiliser efficiency in polyethylene submited to nuclear environments - C.7.1.16 |
Montanari, Gian Carlo (University of Bologna, Italy) |
Partial discharge detection in power cables: practical limits as a function of cable length - A.4.4 |
Effect of semicon-insulation interface on space charge formation in HVDC polymeric cables - B.7.4 |
The use of model cables for evaluation of DC electrical properties of polymeric cable materials - B.7.6 |
Tools for understanding the thermo-electrical behaviour of XLPE insulation in power cables and accessories - B.9.2 |
Moreau, Christophe (EDF R&D, France) |
Current rating of cables installed in plastic ducts - B.8.4 |
Morel, Oscar E. (Detroit Edison Company, MI, USA) |
US experience on condition assessment of various types of taped cable systems by dissolved gas analysis based on a novel sampling and analysis technique - A.5.1 |
Morshuis, Peter H. F. (Delft University of Technology, Netherlands) |
Evaluation of different replacement strategies of a medium voltage cable joint based on statistical failure analysis - B.1.2 |
Failure prediction in 50 kV mass-insulated power cable systems - A.6.3 |
Effect of semicon-insulation interface on space charge formation in HVDC polymeric cables - B.7.4 |
Measurement and modeling of space charge accumulation in polymeric HVDC cable systems - B.7.5 |
The use of model cables for evaluation of DC electrical properties of polymeric cable materials - B.7.6 |
Mosier, Rachel (Power Delivery Consultants, NY, USA) |
New 345 kV underground extruded cable system project in Connecticut - A.2.3 |
Moutassam, Wael (University of Toronto, Canada) |
Barrier optimization algorithm applied to calculation of optimal loading of dissimilar cables in one trench - B.10.6 |
Mudarra, Miguel (Universidad de Catalunya, Spain) |
Annealing effect on the conductivity of XLPE insulation in power cable - C.7.1.4 |
Myoung, Hee-Chul (Hyundai Heavy Industries, South Korea) |
Wavelet analysis based scheme for fault detection and classification in underground power cable systems - C.7.2.2 |
Feasibility study on application of WiMAX technology to underground cables data acquisition - C.7.2.3 |
Monitoring based maintenance for underground cables utilizing sensor networks - C.7.2.15 |
Nagoya, Yoshihisa (VISCAS Corporation, Japan) |
Development of DC +/- 250 kV coaxially-integrated return conductor extruded cable - B.7.3 |
Nakade, Masahiko (Tokyo Electric Power CO, Japan) |
Remarkable tan delta suppression of oil filled cable insulation with extremely degraded tan delta oil - A.5.2 |
Nakajima, Takenori (VISCAS Corporation, Japan) |
Remarkable tan delta suppression of oil filled cable insulation with extremely degraded tan delta oil - A.5.2 |
Nakamura, Tatsuya (Chubu Electric Power Co, Japan) |
Investigation of the aging characteristics of CST termination made of silicone rubber at contamination area - B.1.1 |
Nakanishi, Tatsuo (J-Power Systems Corp., Japan) |
Upgrading quality of 275 kV Y - Branch pre-fabricated transition joint - C.5.1.15 |
Nam, S.H. (LS Cable, Ltd., South Korea) |
Application results of real-time ampacity estimation system and intelligent power cable system. - C.5.2.2 |
Nam, Sang-Bum (NeoTelecom, Seoul, South Korea) |
Monitoring based maintenance for underground cables utilizing sensor networks - C.7.2.15 |
Nasukawa, Shinsuke (Tokyo Electric Power CO, Japan) |
Application of optical fiber current sensors to underground cables - A.5.5 |
Fire prevention method for 275 kV oil-filled cable joint in TEPCO - C.5.2.7 |
Németh, E. (Budapest University of Technology, Hungary) |
Effect of the dielectric strength test on dielectric properties - C.7.1.5 |
Niinobe, Hiroshi (VISCAS Corporation, Japan) |
Compact various transition joints for up to 154 kV power cable - C.5.1.14 |
Nilsson, Ulf H. (BOREALIS AB, Sweden) |
Effect of semicon-insulation interface on space charge formation in HVDC polymeric cables - B.7.4 |
The use of model cables for evaluation of DC electrical properties of polymeric cable materials - B.7.6 |
Initiation site analysis of vented water trees growing from the conductor screen of service and laboratory aged XLPE cable insulation - C.7.1.9 |
Nishiyama, Y. (Chubu Electric Power Co, Japan) |
Development on the mortar material for cable systems in a directional drilling - C.5.2.5 |
Nojo, Hitoshi (J-Power Systems Corp., Japan) |
Development on recycling technology of XLPE - C.5.1.6 |
Normann, T. (Aker Kvaerner Subsea, Norway) |
Thermal and electromagnetic modelling of power umbilicals - B.8.2 |
Notingher jr, P. (LEM, Univ. de Montpellier, France) |
Evolution of space charge and internal electric field distributions in HVDC cable under long term testing - A.7.6 |
Study of thermally and water tree aged polyethylene by infrared spectroscopy, absorption currents and space charge measurements - C.7.1.12 |
Electrical and physico-chemical analysis of Belgium medium voltage cables data bank - C.7.1.19 |
Notingher, Petru V. (University Politehnica of Bucharest, Romania) |
Study of thermally and water tree aged polyethylene by infrared spectroscopy, absorption currents and space charge measurements - C.7.1.12 |
Obraztsov, Yuri (VNIIKP, Russia) |
Water treeing test results for different XLPE compounds obtained with needle techniques - C.7.1.7 |
Ohkawa, Noriyuki (J-Power Systems Corp., Japan) |
Development on recycling technology of XLPE - C.5.1.6 |
Ohtsubo, Masao (Sumitomo 3M, Japan) |
Investigation of the aging characteristics of CST termination made of silicone rubber at contamination area - B.1.1 |
Onuki, Koichi (Tokyo Electric Power CO, Japan) |
Development of an innovative residual-charge measurement technique for water-tree deteriorated XLPE cable - B.6.5 |
Oono, Kouichi (VISCAS Corporation, Japan) |
Development of dry type out-door terminations for 66 to 110 kV XLPE cable - C.5.1.17 |
Orella Sáenz, Josu (Iberdrola Ingeniería y Construcción, Spain) |
Undergrounding and reorganization of the electrical system of the city of Madrid - A.2.5 |
Òrrit, Jordi (Universidad de Catalunya, Spain) |
Annealing effect on the conductivity of XLPE insulation in power cable - C.7.1.4 |
Space charge measurements in XLPE insulated mid-voltage cable: correlation with cable performance. - C.7.1.6 |
Orton, H. (OCEI, Vancouver, Canada) |
Long-life XLPE insulated power cables - C.5.1.5 |
O'Sullivan, Liam (EDF Energy Networks, UK) |
Design of a 45 circuit duct bank - B.10.3 |
Ovsienko, Vladimir (VNIIKP, Russia) |
Water treeing test results for different XLPE compounds obtained with needle techniques - C.7.1.7 |
Park, Chul-bae (KEPCO, South Korea) |
Surge propagation and protection of underground distribution cables - C.5.1.8 |
Surge propagation and protection of underground distribution cables - C.5.1.8 |
Park, Dae-Hee (Wonkwang University, South Korea) |
Partial discharge diagnosis on live EHV power cable using planar UWB antenna - C.7.2.11 |
Park, Dong-Ho (Hyundai Heavy Industries, South Korea) |
Feasibility study on application of WiMAX technology to underground cables data acquisition - C.7.2.3 |
Park, Noh-Joon (Wonkwang University, South Korea) |
Partial discharge diagnosis on live EHV power cable using planar UWB antenna - C.7.2.11 |
Parpal, Jean-Luc (IREQ, Canada) |
Time Domain Spectroscopy (TDS) as a diagnostic tool for MV XLPE underground lines - B.6.3 |
Diagnostic testing of MV accessories by Time Domain Spectroscopy (TDS) - C.7.2.17 |
Pascual, Carmen (General Cable, Spain) |
Choices of flame retardant materials for cables with improved fire behaviour - B.3.5 |
Pélissou, S. (IREQ, Canada) |
Emergency conditions applied to triplex medium-voltage XLPE cables having flat strap neutrals - B.1.4 |
Perego, G. (PRYSMIAN, Italy) |
Measurement and modeling of space charge accumulation in polymeric HVDC cable systems - B.7.5 |
Perkel, Joshua (Georgia Inst., ECE-NEETRAC, GA,USA) |
Validating “diagnostic tests” for cables in service - B.6.6 |
Peters, Rudi (BOREALIS Polymers, Belgium) |
Comparison of different analytical test methods to monitor crosslinking by-products in XLPE insulated cables - A.10.1 |
Petzold, Frank (SebaKMT, Germany) |
Insulation diagnosis of high voltage power cables - C.7.2.1 |
Advanced solution for on-site diagnosis of distribution power cables - C.7.2.4 |
Experiences with PD offline diagnosis on MV cables - Knowledge rules for asset decisions - C.7.2.5 |
Novel method for on-site testing and diagnosis of transmission cables up to 250 kV - C.7.2.10 |
Philippczyk, Christian (NKT Cables, Germany) |
Fire hazard of MV / HV cables installed in tunnels - A.6.4 |
Phung, Toan (University of New South Wales, Australia) |
Continuous on-line monitoring of PDS in HV cables - A.4.3 |
Piechota, Roman (Olex Australia, Australia) |
Verification of mechanical support for cables used on bridge structures at dilation point - B.8.5 |
Piga, Erika (Nuon, Netherlands) |
Installing a long-distance HTS cable - A.3.3 |
Platbrood, G. (LABORELEC, Belgium) |
Electrical and physico-chemical analysis of Belgium medium voltage cables data bank - C.7.1.19 |
Plath, Ronald (IPH Berlin, Germany) |
The St. John´s Wood - Elstree experience: testing a 20 km long 400 kV XLPE-insulated cable system after installation - A.2.2 |
After-installation testing of HV / EHV extruded cable systems – procedures and experiences - A.10.4 |
Pöhler, Stephan (SIEMENS, Germany) |
Gas insulated transmission lines - Under-ground bulk power transmission achieving a maximum of operational safety and reliability - A.3.6 |
Poilleaux, Francis (SILEC CABLE, France) |
Use of ecoconception software to design a HV cable connection - A.8.5 |
Poisson, Bernard (SILEC CABLE, France) |
Choices of flame retardant materials for cables with improved fire behaviour - B.3.5 |
Use of ecoconception software to design a HV cable connection - A.8.5 |
Potvin, Carl (IREQ, Canada) |
Time Domain Spectroscopy (TDS) as a diagnostic tool for MV XLPE underground lines - B.6.3 |
Diagnostic testing of MV accessories by Time Domain Spectroscopy (TDS) - C.7.2.17 |
Prieto, Juan (Red Electrica de España, Spain) |
Challenges of the second submarine interconnection between Spain and Morocco - A.9.1 |
Pultrum, Edwin (KEMA, Netherlands) |
Experience with PD measurements and commissioning tests - A.7.4 |
New approach to measure conductor temperature during type test - A.10.3 |
Putman, D. (Hogeschool West-Vlaanderen, Belgium) |
Thermal transient analysis of underground cables - A.5.6 |
Quak, Ben (Seitz Instruments AG, Switzerland) |
Insulation diagnosis of high voltage power cables - C.7.2.1 |
Advanced solution for on-site diagnosis of distribution power cables - C.7.2.4 |
Novel method for on-site testing and diagnosis of transmission cables up to 250 kV - C.7.2.10 |
Rahman, Naveed (Olex Australia, Australia) |
Challenges & opportunities of installing HV cable in Australia & Sri Lanka - B.10.1 |
Rakowska, Aleksandra (Poznan University, Poland) |
Service experiences for MV cable network – optimistic or pessimistic state of the art? - B.2.5 |
Study of thermally and water tree aged polyethylene by infrared spectroscopy, absorption currents and space charge measurements - C.7.1.12 |
Ramachandran, Ram (The Dow Chemical Company, NJ, USA) |
Long-life XLPE insulated power cables - C.5.1.5 |
Rapp, Hans (ABB Power Products, Sweden) |
Increased voltage for the HVDC light product range – a complete solution - B.4.7 |
Ratel, Gilles (IREQ, Canada) |
A new customized pulling-cable software - B.2.4 |
Regaudie, Vanessa (EDF R&D, France) |
Diagnostic for paper cable condition assesment - A.5.4 |
Rethmeier, Kay (BAUR Pruef- und Messtechnik, Austria) |
New approach for high voltage cable on-site testing - A.4.6 |
Reuter, Mark (Schering Inst., Leibnitz Universität, Germany) |
A numerical method for 3D-description of scattered characteristic aging data from multistress aged XLPE-cable insulation - C.7.1.17 |
Reyes, Rommy R. (Detroit Edison Company, MI, USA) |
US experience on condition assessment of various types of taped cable systems by dissolved gas analysis based on a novel sampling and analysis technique - A.5.1 |
Richardson, Colin G (Buss AG, Switzerland) |
Compounding of semiconductives for high voltage cables - C.5.1.2 |
Riera, Joaquim (Niled, Manresa, Spain) |
New concept in cables and accessories for low voltage underground distribution in spain - B.2.2 |
Robinson, James (BOREALIS Polymers, Belgium) |
Fire hazard of MV / HV cables installed in tunnels - A.6.4 |
Röhrich, Armin (University of Duisburg-Essen, Germany) |
An adaptive monitor program for dynamic thermal rating of power cables - C.5.2.3 |
Rosa, Luiz Henrique (NEXANS, Brasil) |
Aluminium conductors in anti-robbery cables - B.10.2 |
Rosebrock, Wilfried (NEXANS, Germany) |
Modern cable systems in steel pipes - new designed XLPE-insulated cables substituting paper-insulated pipe-type cables - B.4.6 |
Rouif, Sophie (IONISOS, Dagneux, France) |
Irradiation technologies and compounds for cables cross-linking – developments for flat and heat-trace cables - B.3.1 |
Rouillard, Vincent (Victoria University, Australia) |
Verification of mechanical support for cables used on bridge structures at dilation point - B.8.5 |
Rovira, Jacint (General Cable, Spain) |
New concept in cables and accessories for low voltage underground distribution in spain - B.2.2 |
Royer, Christian (Hydro-Québec, Canada) |
Evaluation of the condition and the performance of underground high voltage fluid filled links at Hydro-Québec - B.4.2 |
Rüter, Fredrik (CIGRE, Sweden);£3000£; |
Invited Paper : "Cigré Study Committee B1 (insulated Cables)", by Fredrik RÜTER, Chairman of SC B1 (Sweden) - I.2
|
