 |
|
Jicable'03
6th International Conference on Insulated Power Cables
PARIS-VERSAILLES, FRANCE
22-26 JUNE, 2003 |
|
MONDAY 23 JUNE 2003
Monday 9:00-10:30 Room A The session will include the opening ceremony, official welcome addresses and an invited lecture.
Monday 11:00-12:30 Room A Chairman : SCHROTH Reinhard (PIRELLI KABEL und SYSTEMS Germany) Rapporteur : MAUGAIN Yves (RTE, France) A.1.1. Los Angeles first EHV XLPE cable KHAJAVI M.B., Los Angeles Department of Water And Power, Los Angeles, USA ZENGER W., EPRI, USA A.1.2. Undergrounding the first 400 kV transmission line in Spain using 2 500 mm2 XLPE cables in a ventilated tunnel : the Madrid “Barajas” airport project GRANADINO R., PORTILLO M., Red Electrica de España, Madrid, Spain PLANAS J., Pirelli Cables y Sistemas, Vilanova i la Geltru, Spain A.1.3. Pre-selection of cable type and cable manufacturers for the Metrogrid project in Sydney, Australia JONES S.J., Transgrid, Australia BUCEA G., Transgrid, Australia MAYER A., Transgrid, Australia A.1.4. Utility experience in establishing technical standards specification for powers cable project : A case study from Gulf area Dr. EL-HOSSEINY TAHA EL-SHIRBEENY, Electric Power Research Laboratory, Abu Dhabi, U.A.E. A.1.5. Development of 275 kV XLPE cable with aluminium laminated tape and radial moisture Barrier UMEDA K., MATSUURA K., The Kansai Electric Power Co, Inc., Osaka, Japan WATANABE M., SAKAGUCHI Y., OHIMO T., J-Power Systems Corp., Osaka, Japan A.1.6. Real time monitoring of power cables by fiberoptic technologies tests, applications and outlook LUTON M-H., Sagem, Montereau, France ANDERS G.J., BRAUN J.M., FUJIMOTO N., RIZZETTO S., Kinetrics DOWNES J.A., Sensa
Monday 11:00-12:30 Room B Chairman : KRAHENBÜHL Francis (NEXANS, Switzerland) Rapporteur : CHARLES Francis (SAGEM, France) B.1.1. New medium voltage cable used in France and improvements in laying techniques DAVID J.M., MOREAU C., EDF Les Renardières, Moret-surloing, France TAMBRUN R., ODDI M., EDF DRE MER, Paris La Défense, France B.1.2. Investigation of european specification for medium voltage power cables DAVID J.M., EDF Les Renardières, Moret-sur-loing, France PAPADOPULOS M.S., The Electricity Association, London, United Kingdom FARA A., Enel Distribuzone DDR, ROMA, Italy MARCET F., Iberdrola, Madrid, Spain BANKS V., Pirelli Cables, Wrexham, United Kingdom CENSIER B., Pirelli, Gron, France DIEFENBACH I., Vew Eurotest Gmbh, Dortmund, Germany FONTANA M.,Pirelli Cavi, Milan, Italy FANGAIN J.,Nexans France, Bourg-en-Bresse, France B.1.3. Measurement of the rigidity of polymeric cables JORGENSEN H.J., Defu, Denmark BENJAMINSEN J.T., Sintef Energy Research, Norway NIELSEN N.H., NKT Cables, Denmark LARSEN P.B., RYEN A.,Nexans, Norway ENGER S., Draka Norsk Kabel, Norway B.1.4. Influence of some selected service conditions on properties of XLPE applied in insulated or covered overheads conductors JANISZEWSKI S., RAKOWSKA A., Poznan University of Technology, Poland B.1.5. New solution for a medium voltage link PETRUS R., CHARLES F., LINOSSIER T., PAVOIS P., POILLEAUX F., ZEN L., SAGEM S.A., Montereau, France B.1.6. 20 years of experience with copolymer power cable insulation CAMPUS A., Borealis Polymers NV, Eysins, Switzerland ULRICH M., Börnicker, Berlin, Germany
Monday 14:30-16:00 Room A Chairman : ZENGER Walter (EPRI, USA) Rapporteur : DORISON Eric (EDF R&D, France) A.2.1. Qualification of a highly electrically and mechanically stressed AC cable system ERICSSON A., THUNWALL Bo., ABB Power Technology Products AB, Karlskrona, Sweden GUSTAFSSON A., SVAHN J., ABB Power Technology Products AB, Alingsas, Sweden A.2.2. 120 kV cable installation at Beauharnois power station CHOQUETTE M., Hydro-Québec, Canada CANAAN A., Pirelli Power Cables and Systems, Canada CICOGNA F., Pirelli, Italy A.2.3. A new generation of optimised 120 kV cable systems at Hydro-Quebec ROYER C., AWAD R., BOYER P., CHOQUETTE M., FERLAND P., GIGNAC R., PARPAL J.L., Hydro-Québec, Canada CANAAN A., Pirelli Power Cables and Systems, Canada A.2.4. Prequalification test of 400 kV XLPE CABLE SYSTEM PARK W.K., JEON, S.I., CHOI S.G., LG Cable Ltd, Gyeong-buk, Korea Wouter J.W.M. SLOOT, PULTRUM E., KEMA, Arnhem, The Netherlands A.2.5. Large projects of EHV underground cable systems BJORLOW-LARSEN K., Nexans DEL BRENNA M., Pirelli, Italy KAUMANNS J., ABB MEIER R., Brugg Cables AG, Switzerland KIRCHNER M., N.K.T. Cables ARGAUT P., Sagem, France A.2.6. The development of an ultrasound quality monitoring process for the manufacture of enhanced reliability HV and EHV XLPE cables SMITH C.D., Ipec Ltd, Manchester, United Kingdom GREGORY B., LLOYD S.D., NOTMAN D.A., Cable Consulting International Ltd, Sevenoaks, United Kingdom
Monday 14:30-16:00 Room B Chairman : MAYER Hans A. (Consultant, Australia) Rapporteur : TOURAINE Jean-Charles (PIRELLI, France) B.2.1. Laminate sheath power cable insulated with XLPE for flameretardant applications BOW K.E., The Dow Chemical Co., Midland, USA B.2.2. Fire retardant mechanism intumescent EVA compositions RIVA A., Centro di Cultura per l’Ingegneria delle Materie Plastiche, Alessandria, Italy CAMINO G., Politechnico di Torino, Alessandria, Italy AMIGOUËT P., Nexans-NRD, Lyon, France B.2.3. Compounding of flame retarded materials for the wire and cable industry RICHARDSON COLIN G., Coperion Buss AG, Pratteln, Switzerland B.2.4. Study on low-smoke, low-halogen and flame-retardant PVC sheath composite XIAOGANG S., XIJING CC., XIUFENG L., Shandong Luneng Cable Company, China B.2.5. Advanced SZ-stranding technology for flexible conductors ALTMANN E., Rosendahl, Pischelsdorf, Austria B.2.6. Special MV cable for long stator winding application transrapid Shangaï BURTHE H., LE DREN S., STEINBRINK D., ZAMZOW P.E., Nexans Deutschland Industries, Germany
Monday 16:30-18:00 Room A Chairman : ROSEVEAR Robert (PIRELLI CABLES Ltd., U.K.) Rapporteur : SAUGRAIN Jean-Maxime (NEXANS, France) A.3.1. New generation of GIL. characteristics and applications PONCHON Ph., BUES M., GIRODET A., LORAY F., Alstom, France A.3.2. Experience with 2nd generation gas-insulated transmission lines GIL KOCH H., Siemens AG, Erlangen, Germany A.3.3. Very fast front overvoltage computation in GIL due to switching operations with disconnectors in GIS CRISTESCU D. , Politehnica University of Bucharest, Romania VASILIU Z.H., MICU C., SC Electrica SA NICOARA B., Eduperco Centre, Politehnica University of Bucharest, Romania A.3.4. Development project on HTS Cables COEVOET M., EDF Centre des Renardières, Moret-sur-Loing, France LADIE P., Pirelli Cavi e Systemi Energia, Milan, Italy A.3.5. Volume effect partial discharge inception characteristics in high temperature superconducting cable KOBAYASHI T., HAZEYAMA M., HAYAKAWA N., Nagoya University, Nagoya, Japan TAKAHASHI T., Central Research Institute of Electric Power Industry, Kanagawa, Japan YASUDA K., OKUBO H., Super-GM, Osaka, Japan A.3.6. V-t characteristics of PD inception for LN2 impregnated HTS cable insulation system HAYAKAWA N., KOBAYASHI T., HAZEYAMA M, Nagoya University, Nagoya, Japan TAKAHASHI T., Central Research Institute of Electric Power Industry, Kanagawa, Japan YASUDA K., OKUBO H., Super-GM, Osaka, Japan
Monday 16:30-18:00 Room B Chairman : STEENNIS Fred (KEMA NEDERLAND BV, The Netherlands) Rapporteur : MAMMERI Mohamed (SAGEM, France) B.3.1. Decision support for condition assessment of power cables GULSKI E., WESTER J., TU Delft, The Netherlands DE VRIES F., Nuon InfraCore, The Netherlands MAYORAL M.B., Universidad Politecnica, Madrid, Spain B.3.2. Condition assessment of distribution PILC cables from electrical, chemical and dielectric measurements BUCHHOLTZ V., COLWELL M., Powertech Labs Inc., Surrey, Canada CHERUKUPALLI S., BC Hydro, Vancouver, Canada CRINE J.P., Consultant, Brossard, Canada KEEFE R., EPRI, Palo Alto, USA B.3.3. Influence of corroded conductor on the performance of medium voltage extruded cables PELISSOU S., Hydro Québec (IREQ), Varennes, Canada COTE J., SAVAGE R., Hydro-Québec (Distribution), Montréal, Canada B.3.4. A multidiscipline 35 kV cable failure investigation ORTON H., FURST G. & BATHO A., Orton Consulting Engineers International Ltd, Vancouver, Canada RAO A., Powertech Labs, Vancouver, BC, Canada DE SALVIDAR C., Conductores Monterrey, Mexico GOMEZ MORANTE M., Was with Hylsa, Mexico B.3.5. Diagnostics and maintenance of high-pressure fluid-filled paper cable LINOIS P., ROBINOT G., ROIZARD T., RTE, France MEURICE D., WELSCH E., EDF Les Renardières, Moret-sur- Loing, France
Monday 18:00-18:30 Room A C10.1. “SUBMARINE & DC CABLES” & C10.2. “NEW MATERIALS” BY THEIR CHAIRMEN Monday 18:00-18:30 Room B C8.1. “DESIGN”, C8.2. “TESTING” & C8.3. “AGEING & DIAGNOSTICS” BY THEIR CHAIRMEN TUESDAY 24 JUNE 2003
Tuesday 09:00-10:30 Room A Chairman : BECKER Jean (NEXANS, Belgium) Rapporteur : GARRIGUES Stéphanie (RTE, France) A.4.1. Critical issues for the HV & EHV XLPE cables of today and tomorrow CAMPUS A.D., BOSTROM J.O., HAMPTON R.N., LENNARTSON H., SMEDBERG A., WALD D., Borealis, Sweden A.4.2. 400 kV underground links for bulk power transmission DORISON E., EDF Les Renardières, Moret-sur-Loing, France MAUGAIN Y., RTE, France A.4.3. New 400 kV underground cable system project in Jutland (Denmark) MIKKELSEN S.D., Eltra, Denmark ARGAUT P., Sagem, France A.4.4. Development and prequalification of large conductor EHV cable MOREAU L., GAHUNGU F., DUBOIS D., SY D., MIREBEAU P., Nexans, Calais, France A.4.5. BC Hydro’s experience with a novel on-line monitoring system used on a 242 kV PPLP insulated cable system CHERUKUPALLI S., KOJIMA T., MACPHAIL A., CHORE R., STRUYK E., BC Hydro, Canada KUMADA Y., NAKAJIMA T., Viscas Corporation, Japan A.4.6. Deep Shaft 220 KV XLPE cable installation for hydroelectric power plant MARINI A., ENEL Produzione, Italy Bisleri C., ZACCONE E., Pirelli Cavi e Systemi Energia, Italy
Tuesday 09:00-10:30 Room B Chairman : MIKKELSEN Soren D. (ELTRA, Denmark) Rapporteur : ERAMBERT Michel (ACOME, France) B.4.1. Effects of sea salt sediment on 110 kV cable stations on the Croatian Adriatic coast ALIJINOVIC S., HEP Prijenos d.o.o., Split, Croatia B.4.2. Environmental considerations for “end of life disposal” of cables HELMESJÖ B., Borealis, Sweden WENNERBÄCK M., IFP, Mölndal, Sweden B.4.3. Scraps recycling BARIOZ C., Nexans Research Center, Lyon, France B.4.4. Innovative ways to build underground power cables and communication networks in strategic partnerships with utility pipe owners JEYAPALAN J.K., P.E. Fibotics International, New Milford, USA B.4.5. Environment conscious design of VHV transmission links by cable systems MIREBEAU P., Nexans France ARGAUT P., Sagem, France DEJEAN P.M., Cables Pirelli, France
Tuesday 11:00-12:30 Room A Chairman : SAKUMA Susumu (VISCAS Corp., Japan) Rapporteur : DEJEAN Pierre-Marcel (PIRELLI, France) A.5.1. Development of factory-expanded cold-shrinkable joint for EHV WLPE cables KOBAYASHI S., MUTO D., TANAKA S., IZUKA H., Furukawa Electric Co. Ltd, Chiba, Japan SUETSUGU M., Viscas Co., Tokyo, Japan A.5.2. Space charge distribution in two-layer dielectrics LIANG L., XIA W., WEIFANG J., DEMIN T., Xi’an Jiaotong University, Xi’an, China A.5.3. Development of cold shrinkable joints for 110-220 kV XLPE cable NAKAMURA S., KUWAKI A., HAYASHI K., MIKAMI M., Exsym Co., Tokyo, Japan A.5.4. Development of prefabricated joint for 500 kV XLPE cable (part 2) KOBASHI K., The Kansai Electric Power Co. Inc., Osaka, Japan BAN S., J-Power Systems Co., Osaka, Japan KANAOKA M., J-Power Systems Co., Ibaraki, Japan YONEMURA T., The Furukawa Electric Co. Ltd, Chiba, Japan A.5.5. Test methods for SiR-accessories used in high voltage cables up to 400 kV WEISSENBERG W.G., Brugg Kabel AG, Switzerland KUSCHEL M., SIEMENS AG, Berlin, Germany
Tuesday 11:00-12:30 Room B Chairman : BOW Kenneth. (DOW CHEMICAL CO., USA) Rapporteur : POISSON Bernard (SAGEM, France) B.5.1. New stabilizer concepts for polyethylene used in power cable applications STRICKER F., KOLB M., Ciba Specialty Chemicals, Basel, Switzerland B.5.2. The continuing evolution of semiconductive screening materials for power cable applications BROMAN C., LINDBOM L., NILSSON U., Borealis, Sweden B.5.3. New XLPE insulation for HV and EHV cables CARONIA P.J., Dow Chemical, Somerset, USA, COGEN J.M., KJELLQVIST J., Dow Europe GmbH, Horgen, Switzerland B.5.4. New flexible insulation for medium voltage power cables GROSS L.H., CARONIA P.J., Dow Chemical Co., Somerset, USA B.5.5. Study on properties of rubber improved with nanomaterial used in cable MAN X., XIAOLONG C., Xi’an Jiaotong University, Xi’an, China
Tuesday 14:30-16:00 Room A Chairman : SHUVALOV Mikhail (JSC “VNIIKP”, Russia) Rapporteur : ARGAUT Pierre (SAGEM, France) A.6.1. Super compact rubber block joint with high dielectric constant layer NIINOBE H., KON H., TAKAHASHI T., WATANABE A., AKIMOTO S., Fujikura Ltd. Advanced Technology Center of Power T&D Systems, Chiba, Japan UMEDA S., Viscas Corporation, Tokyo, Japan A.6.2. Anti-explosion protection for HV porcelain & composite terminations GAHUNGU F., Nexans, France CARDINAELS J., Nexans, Belgium STREIT P., ROLLIER D., Nexans, Switzerland A.6.3. Microvaristor based field grading elements for HV terminations GRAMESPACHER H., ABB, Wettingen, Swtizerland SVAHN J., ABB Kabeldon, Alingsas, Sweden GREUTER F., ABB Switzerland, Dättwil, Switzerland A.6.4. New dry outdoor terminations for HV extruded cables DEJEAN P.M., FUSTIER A., MANSUR J., QUAGGIA D., PARMIGIANI B., Pirelli A.6.5. Design of plug-in HV-connex cable termination system for XLPE-high voltage cable up to Um = 245 kV DEISTER P.F., SCHUSTER M., Pfisterer, Winterbach, Germany
Tuesday 14:30-16:00 Room B Chairman : OKAMOTO Tatsuki (CRIEPI, Japan) Rapporteur : TOUREILLE Alain (LEM Montpellier, France) B.6.1. Survey of space charge evolution in high voltage cables submitted to AC voltage as part of Artemis project NOTINGHER P. Jr., TOUREILLE A., AGNEL S., DIDON N., LEM, Montpellier, France CASTELLON J., MALRIEU S., Am2e, Montpellier, France B.6.2. Space charge measurements and ageing evaluation in stressed cables MONTANARI G.C., DIE, University of Bologna, Italy DE ROBERTIS G., PALMIERI F., TechImp, Bologna, Italy PEREGO G., ALBERTINI M., Pirelli Cavi Energia, Italy B.6.3. Study of AC electrical and thermal ageing of XLPE polyethylene by space charge measurements AGNEL S., LEM, TOUREILLE A., LEM Montpellier, France PLATBROOD G., Laborelec, Linkebeek, Belgium B.6.4. The influence of temperature on electrical conduction and space charge in LDPE LAU W.S., CHEN G., University of Southampton, U.K. B.6.5. The effect of voltage reversal on space charge behaviour at high temperature in XLPE cable FU M., CHEN G., University of Southampton, U.K. B.6.6. Study of the effects of the temperature modulation on the lifetime of HV XLPE cables PLATBROOD G., Laborelec, Linkebeek, Belgium JANAH H., Nexans Calais, France CLOET E., ELIA, Brussels, Belgium BECKER J., Nexans, Marcinelle, Belgium
Tuesday 16:30-18:00 Room A Chairman : ERICSSON Anders (ABB Power Technology Products HV Cables, Sweden) Rapporteur : DUBOIS David (NEXANS, France) A.7.1. Subsea XLPE cables HAMPTON R.N., RYDIN C., SMEDBERG A., Borealis, Stenungsund, Sweden A.7.2. Development of 500 kV DC XLPE cable system and its prequalification test MARUYAMA S., ISHII N., The Furukawa Electric Corp., Chiba, Japan YAMANAKA T., KIMURA T., Electric Power Development Corp, Tokyo, Japan TANAKA H., Viscas Co., Tokyo, Japan A.7.3. The development of DC extruded cables and “factory” joints in Japan YAMANAKA T., KIMURA T., Electric Power Development Co. Ltd, Tokyo, Japan MURATA Y., HIROTA H., J-Power Systems Corp., Tokyo, Japan SHIGETOSHI I., Fujikura Ltd, Chiba, Japan MARUYAMA S., The Furukawa Electric Corp., Chiba, Japan A.7.4. The murraylink project - first commercial 150 kV extruded HVDC cable system WORZYK T., JEROENSE, ABB Power Technology Products AB, Karlskrona, Sweden FARR M., TransEnergie Australia, Brisbane, Australia SÖRQVIST T., ABB Power Technology Products AB, Alingsas, Sweden A.7.5. HVDC extruded cables : testing of cable systems aiming at VSC or LCC applications JANAH H., MATALLANA J., SY D., MIREBEAU P., Nexans, Calais, France A.7.6. Energy transmission on long three core/three foil XLPE power cables BALOG G.E., EVENSET G., Nexans, Oslo, Norway RUDOLFSEN F., Norconsult, Scandvika, Norway
Tuesday 16:30-18:00 Room B Chairman : WILLEMS Bert. (PIRELLI CABLES & SYSTEMS N.V., The Netherlands) Rapporteur : MIREBEAU Pierre (NEXANS, France) B.7.1. Additives for the suppression of electrical treeing in polyethylene LEEK, C., LE POIDEVIN G. J., EA Technology, Chester, United Kingdom TAIT P.J.T., University of Manchester Institute of Science & Technology, Manchester, United Kingdom B.7.2. Electrical aging and breakdown of crosslinked polyethylene cables CRINE J.P., Consultant, Brossard, Canada ZENGER W., EPRI, Palo Alto, USA B.7.3. Preventive diagnostic testing of high and medium voltage cables - Progress report WEISSMUELLER G., Technische Werke Ludwigshafen AG, Ludwigshafen am Rhein, Germany ZUEHLKE L., Speyer, Germany B.7.4. Electrical tests of overvoltage protection devices of H.V. cables with water penetration monitoring GOEHLICH L., SCHAPER S., KALKNER W., Technical University Berlin, Germany DONAZZI F., GASPARI R., Pirelli Cables & Systems, Milan, Italy JAHNK V., Lancier Monitoring GmbH, Munster, France B.7.5. Evaluation and modelling of thermo-electric ageing of XLPE insulated power cables : the ARTEMIS outcome LAURENT C., Laboratoire de Génie Electrique, Université P. Sabatier, Toulouse, France CAMPUS A., Borealis, Sweden WEDNESDAY 25 JUNE 2003
Wednesday 09:00-10:30 Room A Chairman : BOONE W. (KEMA Nederland BV, The Netherlands) Rapporteur : LUTON Marie Hélène (SAGEM, France) A.8.1. Transmission power cables partial discharge detection at damped AC voltages GULSKI E., TU Delft, The Netherlands GROOT E., WESTER F.J. NuoN InfraCore, The Netherlands SEITZ P.N. Seitz Instruments AG, Switzerland A.8.2. MV partial discharge cable diagnostics as part of CMB :Yes or No ? Comparison and examples of utility applications VAN SCHAIK N., STEENNIS E.F., Kema High Voltage Laboratory, The Netherlands KRUITHOF M.G., Remu A.8.3. The Cenelec long term test for XLPE MV cables - Everything new and different ? MEURER D., STUERMER M., Nexans Deutschland Industries AG & Co., Hannover, Germany A.8.4. On-site AC testing and PD measurement of 345 kV/2500 mm2 XLPE cable systems for bulk power transmission KAUMANNS J., PLIETH E., ABB Energiekabel, Mannheim, Germany PLATH R., IPH, Berlin, Germany A.8.5. Experience with after laying test PULTRUM E., VERHOEVEN S.A.M., Kema High Voltage Laboratory, The Netherlands A.8.6. Results of after-laying tests of 275 kV XLPE cable line KOBAYASHI S.I., MORIMOTO N., SHIMOHIRO D., KAWAI T., Chubu Electric Power Co. Inc., Nagoya, Japan
Wednesday 09:00-10:30 Room C Chairman : PARPAL Jean-Luc (IREQ, Canada) Rapporteur : MEUNIER Michel (SUPELEC, France) C8.1.1. Use of numerical simulation to develop a new semiconductive layer for HV cables ARGAUT P., THIZON E. SAGEM, France C8.1.2. Design of single core cable installations exposed to shortcircuit stresses INSTANES A., NDLO/SEA, Bergen, Norway ANDREASSEN R., Oglaend System, Kleppe, Norway KULBOTTEN H., LERVIK J.K., SINTEF Energy Research,Norway C8.1.3. A new method for cable conductor temperature prediction under dynamic load SU Q., LI H.J., TAN K.C., Singapore PowerGrid, Singapore C8.1.4. Monitoring and dynamic rating of 120 kV XLPE insulated cable circuits at Hydro-Quebec LEDUC J., CHAABAN M., CHOQUETTE M., IREQ, Research Institute of Hydro-Québec, Québec, Canada C8.1.5. Real time ampacity estimation system for 345 kV transmission cable installed on tunnel LEE S.K., NAM S.H., KO C.S., PARK W.K., LG Cable, Gyungbuk, Korea YOON H.H., Korea Electric Power Co., Seoul; Korea C8.1.6. Current rating of cables installed in tunnels DORISON E., DE KEPPER B., EDF Les Renardières, Moretsur- Loing, France PROTAT F., GURKAHRAMAN A., MASURE L., SUPELEC, France C8.1.7. On-site follow up of the characteristics of controlled backfill, using the TDR moisture-measurement method GILLE A., BEL Engineering, Belgium GEERTS G., ELIA, XANTHOULIS D., FONDER N., Agricultural University of Gembloux MELLA J.-P., Nexans C8.1.8. Early detection of electrical tree through advanced PD measurement inference techniques CAVALLINI A., CONTI M., MONTANARI G.C., DIE, University of Bologna, Italy PULETTI F., TechImp, Bologna, Italy CONTIN A., DEEI, University of Trieste, Italy GUASTAVINO F., DE, University of Genova, Italy OMBELLO F., Pirelli Cavi Energia, Italy C8.1.9. Detection of partial discharges in HV terminations using a capacitive sensor HVIDSTEN S., LUNDGAARD L., SINTEF Energy Researcg, Norway C8.1.10. Partial discharge measurements on service aged medium voltage cables at different frequencies VOIGT G., University of Applied Sciences; Konstanz, Germany MOHAUPT P., BAUR Prüf- und Messtechnik, Sulz, Austria C8.1.11. A development of the hybrid sensor for the detection of the high frequency partial discharge (HFPD) KIM J.H., KOO J.Y., Han Yang University, Korea KIM J.T., DaeJin University, Korea C8.1.12. Sensitive PD detection on drained paper insulated cables KUMM T., HEINRICH R., RETHMEIER K., JACOBSEN P., KALKNER W., Technical University Berlin, Germany ZINBURG E., GEW Rheinenergie AG, Germany C8.1.13. Generation and application of PD knowledge rules for power cables by using advanced database implementation WESTER F.J., GROOT E.R.S., N.V. NUON InfraCore, The Netherlands GULSKI E., SMIT J.J., Delft University of Technology, Delft, The Netherlands SCHIKARSKI, Haefely Test AG, Dietikon, Switzerland C8.1.14. New designs for MV accessories : cold-shrinkable transition joints and evolution of separable cable connectors DE RIDDER Eddy, CHATTERJEE S., CARDINAELS J., Nexans Benelux-Euromold, Erembodegen, Belgium C8.1.15. Tailor-made medium voltage cables EFRAIMSSON L., JOHNSEN U., Ericsson Network Technologies, Energy, Falun, Sweden
Tuesday 09:00-10:30 Room C Chairman : KOO Jaa Yoon (HANYANG UNIVERSITY, Korea) Rapporteur : ESPILIT Thierry (EDF R&D, France) C8.2.1. Modification of cable replacement criterion of isothermal relaxation current measurement system KIM J.Y., KIM S.J.,SONG. I.K., Korea Electric Power Research Institute, Korea YI Dong Young, Uiduk University MOON J.D., Kyungpook National University C8.2.2. Applications to cable diagnosis of new methodology for partial discharge inference MONTANARI G.C., CAVALLINI A., DIE, University of Bologna, Italy OMBELLO F., FRANCHI BONONI F., Pirelli Cavi, Italy ARLOTTI C., TechImp, Bologna, Italy C8.2.3. Change with time in PD characteristics of a void in the semicon/ polyethylene interface KIM C.S., MIZUTANI T., Nagoya University, Japan KOBAYASHI S., MORIMOTO N., TSUJI S., SAITOU H., Chubu Electric Power Power Co., Nagoya, Japan C8.2.4. Aspects and implications of on-line PD detection and localization of MV cable systems STEENNIS E.F., VAN DER WIELEN P.C.J.M., VEEN J., WOUTERS P.A.A.F, Kema High Voltage Laboratory, The Netherlands C8.2.5. Inductive directional couplers as new sensors for PD detection and localization on high voltage XLPE cable accessories HEINRICH R.,RETHMEIER K., KALKNER W., Technical University Berlin, Germany C8.2.6. Sensitive PD detection on high voltage XLPE cable lines using field coupling sensors HEINRICH R., RETHMEIER K., KALKNER W. Technical University Berlin, Germany PLATH R., IPH, High Voltage Lab. WEISSENBERG, BRUGG KABEL AG C8.2.7. The analysis of the partial discharge pattern of the artificial defects at the interfaces of XLPE cable joint using laboratory model LEE J.S., KIM J.T., KOO J.Y., Hanyang University, Korea. C8.2.8. On-line PD diagnostics for power cables - Applicability and sensitivity WESTER F.J., Nuon InfraCore, The Netherlands GULSKI E., SMIT J.J., Delft University of Technology, Delft, The Netherlands SCHIKARSKI, Haefely Test AG, Dietikon, Switzerland SEITZ P.N., Seitz Instruments AG, Switzerland C8.2.9. Optimised cable end termination systems for laboratory tests on MV, HV and EHV cables SCHIERIG S., PIETSCH, KUBAT M., Highvolt Prüftechnik Dresden GmbH, Germany
Wednesday 09:00-10:30 Room C Chairman : MONTANARI Giancarlo (University of Bologna, Italy) Rapporteur : LAURENT Christian (Paul Sabatier University, LGET, France) C8.3.1. Microspectral analysis in UV-vis range as a tool for power cable insulation diagnosis SHUVALOV M., OVSIENKO V., KORSAKOVA V., All-Russian Cable R&D Institute, Russia C8.3.2. Actual application of on-site diagnostic method for water treed XLPE cable by harmonics in AC loss of current TANAKA A., TSUJIMOTO T., NAKADE M., Tokyo Electric Power Company, Tokyo, Japan YAGI Y., ADACHI K.,The Furukawa Electric Co., Chiba, Japan TANAKA H., Viscas Corporation, Tokyo, Japan C8.3.3. Condition assessment of triple extruded MV XLPE cables BENJAMINSEN J.T., HVIDSTEN S., SINTEF Energy, Norway C8.3.4. On-site TSM measurements on HV cable loops as part of the Artemis project CASTELLON J., MALRIEU S., Am2e, Montpellier, France NOTINGHER P., Jr., TOUREILLE A., LEM; Montpellier, France BECKER J., Nexans Benelux, Belgium DEJEAN P.M., Câbles Pirelli, France JANAH H., MATALLANA J., Nexans, France VERITE J.C., EDF R&D, France C8.3.5. Diagnostic method for water tree ageing XLPE cable with residual charge TOYA A., TANAKA A., Tokyo Electric Power Company, Tokyo, Japan OOTAKA I., EXSYM Corporation, Tokyo, Japan SAKAMOTO T., Mitsubishi Cable Industries, Tokyo, Japan C8.3.6. The improved residual-charge measurement to diagnose the water-tree deteriorated power cable KON H., WATANABE K., Fujikura Ltd, Japan MIYAJIMA K., UCHIDA K., Chubu Electric Co., Japan C8.3.7. The Raman spectroscopy analysis of electrically aged polyethylene CHEN G., A.S. VAUGHAN, University of Southampton, UK LIU X.Z., Xian Jiaotong University, China C8.3.8. Diagnostic of field aged cables and accessories by timedomain dielectric spectroscopy (TDDS) AMYOT N., FOURNIER D., DRAPEAU J.F., IREQ, Québec, Canada DAVID E., Ecole de Technologie Supérieure, Québec, Canada C8.3.9. An analysis of the water treeing resistance of polymer compounds for cable insulation using the two needles method TEISSEDRE G., FILIPPINI J.C., LEMD, CNRS, Grenoble, France NYLANDER P., Borealis AB, Stenungsund, Sweden CAMPUS A., Borealis polymers, Belgium C8.3.10. Influence of electrochemical effects on vented tree initiation in accelerated tests BRÜGGEMANN M., KALKNER W., Technische Universität Berlin, Berlin, Germany BROMAN C., SMEDBERG A., Borealis AB, Stenungsund, Sweden
Wednesday 11:00-12:30 Room A Chairman : COUNESON Pascal (BEL ENGINEERING, Belgium) Rapporteur : LESUR Frédéric (EDF R&D, France) A9.1. Calculation of the effects of mutual heating on the rating of electric power cable systems HIRANANDANI A., DTE Energy, Detroit, USA A9.2. Effect of power cable installation on current rating, magnetic fields and reliability de WILD F.H., MEIJER G.J., Kema, The Netherlands A9.3. Ampacity program of IEC 60287 and JCS 168 E suitable for KEPCO JEONG S.H., CHOI S.B., KIM D.K., KERI, Gyungnam, Korea YOON H.H., TACK E.G., Korea Electric Power Co. Seoul, Korea A9.4. Cable crossings DORISON E., EDF Les Renardières, Moret-sur-Loing, France A9.5. Determination of cables dynamic rating using a FEM LI Hong Jie, TAN Kee Choon, SU Qi., Power Grid, Singapore A9.6. Cable rating using a computer analogue LYALL J.S., School of Electrical and Electronic Systems Engineering, Brisbane, Australia
Wednesday 11:00-12:30 Room B Chairman : HAMPTON Nigel (Borealis AB, Sweden) Rapporteur : FILIPPINI Jean (LEMD/CNRS, France) B9.1. Accelerated long term evaluation of MV-XLPE cables BENJAMINSEN J.T., FAREMO H., Sintef Energy, Norway LARSEN P.B., RYEN A., WOLDEN A., Nexans Norway AS, Norway B9.2. Assessment of cable life as measured by a variety of accelerated ageing tests BOSTROM J.O., MARSDEN J.O., HAMPTON N., NILSSON U.H., Borealis Compounds LCC, USA B9.3. A new test method to evaluate the water treeing resistance of polymers for cable insulation FILIPPINI C., LEMD CNRS, France RADU I., LEMD, France NOTINGHER P., Politehnica University, Bucharest, Romania CAMPUS A., Borealis Polymers NV, Belgium B9.4. Comparative laboratory evaluations of TR-XLPE, XLPE and EPR 15 kV, insulated cables KATZ C., FRYSZCZYN B., Cable Technology Laboratories Inc., USA WALKER M., Center Point Energy, Houston, USA, KEEFE R., EPRI, USA B9.5. Evaluation of tree retardant XLPE(TR-XLPE) and EPR insulated 35 kV cables after 17 years of field service MENDENSOHN A., PERSON T.J., The Dow Chemical Co., USA SHATTUCK G.B., Alabama Power, Birmingham, USA HARTLEIN R. , Neetrac, Atlanta, USA B9.6. Investigation of electrochemical degradation in a serviceaged, cable-cure-restorated, PE-insulated M.V. cables BRÜGGEMANN M., KALKNER W., Technische Universität Berlin, Germany
Wednesday 14:30-16:00 Room A Chairman : YOON Kok Thean (PowerGrid Ltd, Singapore) Rapporteur : MATHIOLON Guy (Serfim, France) A10.1. H.V. cable pulling improvements with unwinding machines HERBRETEAU A., Omnium Technique du Câble, Avignon, France THEVENON H., Consultant, Lyon, France A10.2. Mechanical laying of HDPE ducts in rural area MARTY L., LE CORGUILLE J.L., RTE France, France A10.3. Restraining the migration of HV cables in duct TARNOWSKI J., IORDANESCU, AWAD R., IREQ, Canada A10.4. Construction of 275kV underground transmission line composed of 2,500m XLPE cable unit lengths HAYASHI Naoki, SAITOU Hiroshi, SHIMOHIRO Daisuke, Chubu Electric Power Co. Inc., Nagoya, Japan KAWAI T., Chubu Electric Power Co., Inc., Nagano, Japan ISHII N., The Furukawa Electric Co. Ltd, Tokyo, Japan HIRASAWA T., Viscas Corporation, Tokyo, Japan WATANABE M., J-Power Systems Corp., Osaka, Japan NAKAGAWA T., J-Power Systems Corp., Tokyo, Japan A10.5. Innovating installation method using water as a carrying fluid to install power cables in-pre lubricated ducts in trenches of reduced dimensions. BLANC C., Novoplastic, France PLUMETTAZ G., Plumettaz SA, France TRICHARD C., Netconcept, France A10.6. Increasing cable drum lengths LESUR F., EDF Les Renardières, Moret-sur-Loing, France ARGAUT P., SACHER J., SAGEM, Montereau, France
Wednesday 14:30-16:00 Room C Chairman : PEREGO Gabriele (PIRELLI, Italy) Rapporteur : BOURGEAT Xavier (RTE, France) C.10.1.1. Novel polymeric insulating compounds for HVDC applications MENDELSOHN A., JOW J., The Dow Chemical Co., USA C.10.1.2. Material solutions for extruded HVDC cables NILSSON U.H., CAMPUS A., HAMPTON R.N. Borealis AB, Stenungsund, Sweden BERGKVIST M., CARSTENSEN P., JONSSON J., ZEBOUCHI, ABB, Västerås, Sweden FARKAS A., JEROENSE M., ABB Power Technology Products AB, Sweden C.10.1.3. Materials for HVDC extruded cables JANAH H., MATALLANA J., COELHO R., MIREBEAU P., Nexans, Calais, France OUREN S., Nexans Norway, Ostfold, Norway C.10.1.4. Effect of ageing on volume resistivity of different kinds of polyethylene cable insulations RAKOWSKA A., Poznan University of Technology, Poland HAJDROWSKI K., Energityka Poznanska Utility, Poland C.10.1.5. Application of PPLP to DC MI cables HIROTA H., MITANI M., KATAKAI S., MURATA Y., J-Power Systems Corporation, Japan HATA R., Sumitomo Electric Industries Ltd, Japan C.10.1.6. Test of polymers for high voltage DC cables RASMUSSEN C.N., NKT Research A/S, Lyngby, Denmark HOLBOL J.T., HENRIKSEN M., Technical University of Denmark, Lyngby, Denmark
Wednesday 14:30-16:00 Room C Chairman : VALDENEGRO Ariel (Universidad de Chile) Rapporteur : JANAH Hakim (NEXANS, France) C10.2.1. Acetylene black or other conductive carbon blacks in HV cable compounds. A historical fact or a technological requirement ? PROBST N., GRIVEI E., VAN BELLINGEN C., Erachem Comilog SA Brussels, Belgium C10.2.2. Study on surface smoothness of extruded high filling polyolefin compound XIUFENG L., XIAOGANG S., XIJING C., ShangDong LuNeng Cable Company, China C10.2.3. Application of fifth-generation jacketing technology for improved performance DAMMERT R.C., Borealis AB, Stenungsund, Sweden KIRCHNER M., PHILIPPCZYK C., NKT Cables, Köln, Germany WALD D., Borealis Polymers NV, Mechelen, Belgium C10.2.4. Influence of the grain size on electrical and mechanical properties of non-linear materials BAYON L., KOELBLIN C., JABBOUR R., Nexans Research Center, Lyon, France C10.2.5. Strippable shields with improved thermal stability and faster cable extrusion rates PANG K.P., PERSON T.J., Dow Chemical Company, USA C10.2.6. Material identity card methodology BERTRAND Y., EDF R&D, France GARRIGUES S., RTE, France
Wednesday 16:30-18:00 Room A There are two parts to the closing session : Round Table JICABLE 03 Award and closing session of the Conference Modified Last : 26/09/2008 |